Jailbreak Your iPhone 3GS, iPhone 4 Using Limera1n (Windows)

These are instructions on how to jailbreak your iPhone 3GS and iPhone 4 using Limera1n for Windows. Limera1n supports iOS 4.0, 4.0.1, 4.0.2, and 4.1.

**If you have an iPhone 3GS with the new bootrom there is a bug that still needs to be fixed. Please want until we remove this message before continuing.**

Remember: Do not update to iOS 4.1 if you need the unlock. Ultrasn0w does not support that baseband yet.

Step One
Open your web browser of choice and navigate to here. Click the Download for Windows link at the bottom of the screen.

 Step Two
When prompted save the download to your desktop.

Step Three
Double click the limera1n.exe file from the desktop to launch the application 

Step Four
Click the large make it ra1n button.

Step Five
You iPhone will now be placed in recovery mode.

Press both the power and the home buttons.

When Limera1n asks you to, release the power button.

 

Your phone will now be in DFU mode.

As limera1n performs its exploit you will see the image of a lime raindrop on your iPhone.

Limera1n will let you know when it is complete.

Step Six
After you power back on your iPhone you will see a new icon on the SpringBoard entitled limera1n. Press it to continue.

Step Seven
Once Limera1n opens select Cydia then press the Install button at the top right of the screen.

 

Step Eight
Once the Cydia installation has completed you must reboot your iPhone.

Step Nine
When your iPhone has restarted you can run Cydia. Let it do all the necessary updates then follow our unlock tutorial if possible for your device.

NOTE*: To remove the limera1n icon from your desktop you can install CyDelete from Cydia then use it to delete the application. Eventually this capability should be present in limera1n itself. source: (ikaskus)

Read more »

Tips distinguish iPhone replica with the original

here way to check who is the original.
1. for 2G only. backcase nothing other than the iron.
2. check S / N and IMEI, which took place in backcase, cross check in the box.
3. check the settings>> general>> about
4. IPhone internal memory only. It means can not be added.
5. before buying, try to borrow the iPhone has a friend, will feel the difference when holding the iPhone replica.
6. Motion in the iPhone OS and it is definitely felt the difference.
7. there is a laptop + iTunes? plug, if not to detect, it's a replica.

more:
The screen does not support 16 million colors, even as hp china in general
Homescreen there are only 4 lines (3 for application, 1 for the dock)
There are no labels icon
typeface (font) used a different, larger more bold
sometimes there is still use letters / Chinese kanji
weird loading screen, typical hp china
no infrared
no radio
no TV
dual-sim
There are dual OS
YouTube icon instead to watch a movie with Apple's interface is not really.

Part list Number FU:


hongkong units

MB489ZP/A 8gb blk
MB496ZP/A 16gb blk
MB500ZP/A 16gb white

here is the list of official unlock units from other countries,in other words, 
these are the safe models to buy from Greenhills.

MB489NF/A
MB496NF/A
MB500NF/A

MB489CZ/A
MB496CZ/A
MB500CZ/A

MB490CZ/A
MB497CZ/A
MB501CZ/A

MB489CZ/A
MB496CZ/A
MB500CZ/A

MB489GR/A
MB496GR/A
MB500GR/A

MB489GR/A
MB496GR/A
MB500GR/A
 

Read more »

code Error iTunes

If you have problems restoring, try to use DFU mode, because it has a chance to succeed in restoring.

Error 1011, 1013, 1015 when the restore is complete:
means the modem firmware could not be updated, if this error occurs when you're downgrading devices (eg: 1.1.4 to 1.1.3), this is normal. you need a program like Independence (on Macintosh) or Jailbreak 1.1.2 (on windows), to boot your device from the recovery mode, as well as complete the downgrade. if the device you have the words "need repair", and you restore, the same error persists, the possibility of permanent damage in your device. try to use DFU restore, and hope for the best.

Error 1602, 1603:
This is sort of an unknown error. but it is usually caused by a loss of connection to the Device your iTunes. usually Reboot or restart your Apple device to solve this problem, there are times where you need to reinstall iTunes, or where in some serious cases, need help Apple support. you may be lucky when the restore without entering the SIM card. (off the SIM card, reboot the device into restore mode, then try the restore once again.)

Error 1600 on OSX:
try mkdir ~ / Library / iTunes / "Device Support"
if that directory already exists, try deleting all files in it.

Error 1604:
see at here

Error 1, 2, 3, 6, or an error number below 99:
your device can not be restore mode.
try to DFU mode, and try to restore once again.

Error 9, 23
hardware problem, it is advisable to claim to Apple to request instead.

Error 1013/1014/1015

This error message occurs when you downgrade or upgrade to a different baseband than the firmware your restoring to has. This message does NOT mean the restore failed – it simply means the phone firmware does not match the baseband. Put your phone in recovery mode and then kick the phone into normal mode and out of recovery mode and it will work.

Error 6 and 10

This error message is because of a problem with your firmware – this message will occur most often because of using unsuitable boot/recovery images. Make a new custom firmware to fix this and use suitable boot images or use the standard images that came with the pwnage software.

Error 1603/1604 – 160? something

IF YOU ARE RESTORING TO A STANDARD APPLE FIRMWARE *NOT CUSTOM FIRMWARE”

This error is down to itunes not liking your USB ports on your computer. Use a different USB slot or a different computer if possible. That is the easiest fix!

IF YOU ARE RESTORING TO A CUSTOM FIRMWARE AFTER RESTORING FROM STANDARD APPLE FIRMWARE

IF you have pwned your phone once and then restored back to apple original firmware successfully and THEN tried to restore custom firmware you WILL get an error in iTunes as the apple firmware “unpawned” your phone. You have to repwn it using iPwner and then you can restore using custom firmware.

IF YOU ARE RESTORING TO CUSTOM FIRMWARE AND YOUR PHONE IS STILL PWNED

Read more »

seting internet network iphone

Access Point Name (APN) is a computer protocol that typically allows a user's computer to access the internet using the mobile phone network.

On a technical level it is a configurable network identifier used by a mobile device when connecting to a GSM carrier. The carrier will then examine this identifier to determine what type of network connection should be created, for example: what IP addresses should be assigned to the wireless device, what security methods should be used, and/or how should it be connected to some private customer network.

More specifically, the Access point name (APN) identifies an IP packet data network (PDN), that a mobile data user wants to communicate with. In addition to identifying a PDN, an APN may also be used to define the type of service, (eg connection to wireless application protocol (WAP) server, multimedia messaging service (MMS)), that is provided by the PDN. APN is used in 3GPP data access networks, eg general packet radio service (GPRS), evolved packet core (EPC).

setting your iphone configuration

Navigate to Setting > General > Network > Cellular Data Network

  

 

setting APN telkomsel

setting APN XL

setting APN mentari

setting APN matrix

setting APN IM3 

 

setting APN 3 

 

Read more »